This product has good high temperature performance and water repellent and moisture resistant performance and electrical insulation properties, arc corona resistance performance, weather resistance and chemical stability. This product could dry in room temperature. This product has high hardness(more than 2H), high gloss, good fullness, high anti-yellowing performance after fully cured .
Details
Pure silicone resin 1056D
Resin properties and uses:
This product has good high temperature performance and water repellent and moisture resistant performance and electrical insulation properties, arc corona resistance performance, weather resistance and chemical stability. This product could dry in room temperature. This product has high hardness(more than 2H), high gloss, good fullness, high anti-yellowing performance after fully cured .
1056D widely use as raw material and H level insolation coating of(≥500℃)high temperature resistant coating and special coatings.
Index:
Appearance: light yellow to colorless transparent liquid, allows light milk light, no mechanical impurities
Solid content:55±1%
Viscosity:20~50 seconds (No 4 cup)
Acid value:≤4mg KOH/g
Film Hardness:≥2H
Curing method:
This product could dry in room temperature with certain hardness.
This product uses the high temperature curing, 200℃ for 30 min; 250℃ for 20 min;
Attentions:
a.The diluted solvent used for this product shall not contain water, pyridine and impurities containing sulfur compounds, otherwise it will affect the adhesion, dry and other properties of the resin paint film.。
b.This product in the processing process, there will be a large number of xylene and other flammable and explosive, toxic solvents volatile out, should pay attention to strengthen the field of ventilation, pay attention to fire, strictly avoid the fire source. Operator should pay attention to labor protection.
c.This product is used in the process of processing equipment, containers must be clean. To prevent dust and foreign bodies and mixed with water.
d.Acid, alkali, salt of organic acid and amine compounds have accelerated curing effect on this product, and affects heat resistance and electric properties. Therefore, this product should be kept in strict isolation from these substances.
Storage:
The product storage period is tentatively scheduled for half a year. This product should be stored in a cool, dry and ventilated place, prevent sun direct radiation; prevent the serious pollution of acid, alkali and should be cut off from the source of the fire and away from the heat source.
Package:
200/20KGS Iron Bucket.
Anhui ZINCA Silicone Technologies Co., Ltd.
phone:+86-15395202093
Email:wfffff666666@163.com
Whatsapp: +8615395202093
Wechat:Wufan-7777777